• Wifi Hotspot Software
• Harga Mikrotik Rb750
• Mikrotik Hotspot Software

How to hack mikrotik hotspot

Wifi Hotspot Software

HACK hotspot mikrotik 100% WORK 2017 - Duration: 17:04. Trian si anak singkong 17,650 views. Cara hack wifi mikrotik 100% work - Duration: 6:50.

Pada Judul ditulis 'Setting Mikrotik RB750' hal ini tidak. Bisa bikin hotspot nya, saya pakai Indihome - mikrotik. Wifi 100% Work!!! Cara Hack Wireless. Banyak cara untuk masuk ke MikroTik. Sygic wince torrent. Bukan pelajaran hack mikrotik. Cara Hacking Wireless Router Modem ADSL Speedy via LAN atau WiFi.

During recent months a growing number of free internet tricks spread via the Internet. Whether it's breaking through mobile broadband or hotspot cafe that was presented earlier. That's not enough, this time there is another trick is to break free internet hotspot mikrotik. Actually been used in this way, but having just my practice then I write the steps to break his mikrotik hotspot.
First of all, we must remember that we usually connect with mikrotik hotspot then we will be faced with the proxy login menu before we can browse. Usually this happens on college campuses that provide hotspot faculty or in the office. Obviously at that time we did not think of how to hack mikrotik hotspot is.
This is her way to by pass proxy log, actually more appropriate if the client is called cloning. The point is we do not have to login first to be able to browse, because the target has been logged. We as his clone so no need to login. This trick only works for clients that we are still connected to the hotspot clone.
Here it is step by step break hotspot mikrotik:
Here it is step by step break hotspot mikrotik:
1. Download Netcut first, the program is to determine the MAC address connected with us.
2. Connect your computer to the hotspot mikrotik
3. Run the program Netcut
4. Select your LAN Card / NIC we use by clicking the menu Choice NetCard

Harga Mikrotik Rb750

if you do not understand, you can contact:

Labels: Hack Hotspot

Mikrotik 4 WAN Load Balancing using PCC method. Complete Script ! by zaiB

Updated 4th December, 2013Gta iv hot coffee download.

This post illustrates on how you can configure load balancing of multiple wan links using Mikrotik Routerboard hardware (or RouterOS x86 version). In this example I have used Mikrotik Routerboard CCR 1036 model. 4 ports are connected with Four DSL Routers, and 5th port was connected with User LAN. Don’t forget to rename the interface names accordingly if you are a copy paste fan.

In this example, we are using PCC (per connection classifier) method to achieve the load balancing. There are few options using this approach & each option may give you different results.

Example#1:src-address
Use src-address as classifier, this way you will get rid of problems like https/broken link, streaming issues etc (dueot ip changing on each request) . Load balancing using this PCC technique (src-address) requires that users must be hitting the PCC box directly (either dhcp/ppp server etc). In this method user will be tagged with specific WAN link once connected with the mikrotik. This way till his online session he will stick to that particular wan link. A single user will not be ale to use all WAN links. This approach works good if you have a bit higher amount of bandwidth on each link.

Example#2: both-addresses-and-ports
If somehow you are not satisfied with the src-addressapproach (OR your requirements is to achieve maximum download speed using all WAN links simultaneously) , Then play with the PCC Classifier, Tryboth addresses and portsas the classifier (as used in this guide as well). While this will randomize things the most and in theory give you the most fair allocation of bandwidth (as any request will be distributed among all WAN links), BUT there is also a good chance that it will break certain things like banking web sites and some forums. This is because often times a HTTP requests will generate several connections, so there is a chance that some requests may go out a different route than the initial one, and that will break secure web sites. For that reason I usually like to go with src-addressPCC load balancing approach (but only if users are hitting the pcc box)

~Syed Jahanzaib

Scenario:

• Mikrotik LAN IP = 192.168.0.1
• DSL1 Router IP = 192.168.1.1 / INTERFACE NAME = WAN1
• DSL2 Router IP = 192.168.1.1 / INTERFACE NAME = WAN2
• DSL3 Router IP = 192.168.1.1 / INTERFACE NAME = WAN3
• DSL4 Router IP = 192.168.1.1 / INTERFACE NAME = WAN4

the Script !

Now Configure DNS server so users can resolve host names using your mikrotik. Game bleach heat the soul 8 ppsspp.

All Done !

Now Test the link by putting user load, the more multiple users load you put on it, the better Load Balance result you will get 🙂

PCC WITH UN-EQUAL WAN LINKS

If you have Un-Equal WAN Links, for example WAN,1,2,3 are of 4MB and WAN,4 is of 8 Mb, and you want to force MT to use WAN4 link more then other because of its capacity, Then you have to Add more PCC rules assigning the same two marks to a specific link i.e WAN4 , something like

Code:

PCC WITH SAME GATEWAY

Try defining the outbound interface.
For example replace this.

Replace the eth1-ISP with your own wan interface name , use the notation % for sure.
If it works , let me know

TIP:

Mikrotik Hotspot Software

Using modems in BRIDGE mode will probably give you some better performance and control 🙂 Try it 😉

22 WAN PCC script , using TPLINK routers as wan gateways

Just for reference purposes,

٩(●̮̮̃•̃)۶ ZaiB ٩(●̮̮̃•̃)۶